2 Into 1 Garage Door Conversions in the Northern Rivers

Not all councils are the same and approval requirements can vary. Structural engineering is typically all that's required. Some cases may require CDC or DA approval, in which case we can help with this.

Yes. Structural engineering is typically required when removing the centre column.

Most conversions are generally completed within a few days.

Yes. Upon site inspection the process for this will be advised. For single storey brick homes we recommend removing the brick above the opening for a clean, modern look with garage door finishing with trim to eave. Double storey will require a larger beam and so flush with eave finish may not be possible, in which case we will clad or trim out the beam.

In most cases yes. For brick we generally can use any bricks removed for patching. With cladding, most types are still in production. With render it can be patched, however re-rendering those sections may be required.

Typically we will increase the opening to the existing garage opening minus the pillar. Any opening size is achievable depending on existing structure, roof loads, access height and all subject to engineering.

Yes, we manage both the building works and the garage door supply and install as part of the complete project.

We are Northern Rivers based and typically service between Yamba and Tweed and out to Casino.